Ruger 77/50 sealed breech 209 system
Complete 209 Bolt for Ruger 77/50
Ruger 77/50 209 primer sealed into breech

Ruger 77/50 209 System, Installed

$250.00 – $380.00

Install Ruger 77/50 209 shot shell system on customer’s Ruger bolt, or build/send a new complete 77/50 209 bolt.

SKU: N/A Categories: ,

Description

We can convert your Ruger 77/50 bolt to use our sealed breech 209 system,

or

send you an entire new 209 converted bolt.    The conversion of your existing bolt is cheaper!

Picture
Complete system: this is what you receive (either your bolt returned converted, or a new bolt built for you)

The Ruger conversion’s breech plug uses the same vent liner as the Savage ML-2 and our Remington 209 conversion

After getting some requests from Ruger 77/50 owners, we’ve modified our sealed breech 209 system to work on Ruger 77/50 rifles.   The conversion is more difficult than converting a Remington, so for now we only offer this as a service (we currently will not offer DIY kits).   Turn around on these is 4 weeks, to 2 months.  Depends on if its hunting season and how much other work I have on my bench.  Got questions?   Please use the contact form or call us at the phone number on the bottom of every page so we can chat about it.
​
​​Purchase this service, and mail us your bolt.   We’ll take out and discard your old striker, convert, & send your bolt back with:– a new breech plug
– vent liner
– small screw (to serve as a bolt stop)
– hex head L wrench.


Be sure to put your email address in the online check out so that you can be emailed a receipt with our address.   (if you want your take out parts back please let us know, but remember once the conversion is done, there really isn’t any going back to the old system, and by default I through them in my junk bin).

I wrote a blog post about this kit; you probPictureably should read it.

Live out west and have a season where you can’t use a sealed breech or 209’s, but then have another where you can?   Don’t want to go through the trouble of converting your original bolt?  Bought a rifle that is missing a bolt?   Not a problem!  Instead of converting, we can make an entire 209 converted bolt for you!

Our Ruger 77/50 kit uses a similar breech plug as our Remington 209 kit, except that our Ruger kit crushes primers to achieve a seal.    You may need to try a few different brands and see what seals in your rifle.

Also you’ll need to replace the forward most screw on the left side of the receiver with the one we send in order to make the bolt stop its rearward movement to place the bolt nose in the loading window.   It makes priming and de-priming much easier, though it does complicate bolt removal (you have to back the screw out a few turns to take the bolt out).​

Picture
The kit will come with small slotted screw to replace this one above. It will keep the bolt nose in the loading port.
Turn around on this conversion will be as long as a month as it is more involved than converting the Remington (or can take even longer during the holidays!).

Picture

The kit comes with one vent liner, most folks buy extra vent liners and a pin gage to know when the vent liner has worn out.
We have lots of muzzle loader parts and accessories.  Don’t forget to add on some important things to your cart to save on shipping like:
–  MMP Sabots
–  Vent-liners
–  Hex L wrenches
–  .036 ZZ Pin Gages to measure vent liners orifices
STILL HAVE QUESTIONS?  PLEASE READ OUR FAQ BEFORE CONTACTING US!

YOU CAN DOWNLOAD THE USER INSTRUCTIONS FOR THIS CONVERSION HERE: Ruger77_50_209_instructions

Picture
Please totally disassemble and clean your rifle prior to using our conversion
The original setup is filthy.   Our conversion will stop the blow-back from getting all through the rifle.   Please clean up all the blow back by removing the barreled action and scrubbing it away before you put our conversion to use!
Picture
Completed bolt shown feeding a primer towards the mouth of the breech plug (rifle and primers are not for sale)

 

Additional information

Weight N/A
Convert your bolt or Build a new bolt

Install in my bolt (mail us your bolt for Upgrade), Build a new bolt for you

1 review for Ruger 77/50 209 System, Installed

  1. Badger Ridge –

    Still working the kinks out of the new website. This review was emailed in:

    All I can say is awesome.
    My Remington 700ML always gave me fits and I was never sure I would get a great fire time and time again.
    installed my Badger rebuild kit and it works flawlessly.
    My confidence in the gun has returned thanks to Badger.
    Appreciate the work you did
    Thanks
    Mike P

Add a review

You may also like…

Related Products